This silicone mould can be used to make a bundt cake in two sizes using modelling clay such as Fimo®. They are true to scale and have a diameter of approx. 17.7 mm and 21.2 mm respectively.
The mould is heat-resistant up to 200° C for a short time. Material such as polymer clay can therefore be baked in the mould (110° C for 30 minutes).
Epoxy resin can also be used as a filling, but this significantly reduces the service life of the mould, as the resin will cause it to crumble over time. UV resins are not suitable as the mould should be transparent.
Instructions
Press a ball of Fimo®, Cernit® etc. into the moulds (I use modelling tools for this).
Now carefully bend the mould to release the clay and bake your miniatures in a preheated oven according to the manufacturer's instructions (not above 200° C!). Alternatively, you can leave the chocolates in the mould and only remove them after baking.
What should I bear in mind with silicone moulds?
Scale | 1:12 |
Material | Silicone |
Measurements |
Length: 42 mm Width: 54 mm Height: 12 mm |
Each silicone mould is unique, so there may be minimal deviations.
These silicone moulds are not toys, but collector's items for adults, so they are not suitable for children!
The silicone is not food safe.
Frequently Asked Questions
↳ show all