1 1

Kleinkram Miniatures

Table Leg — 3D Model

Table Leg — 3D Model

€0,00 EUR
€0,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

F0002

All other items shown are not part of this offer.

Manufacturer

Coralie Hones
Westendstraße 28
86916 Kaufering
Germany
cora@kleinkram-miniatures.com

Safety Notes

Attention:

View full details
What is an unsanded miniature?

This variant has small indentations or bumps on one or two sides, which should be sanded down before painting. This can be done with a nail file, sandpaper or a multi-tool (e.g. Dremel, Proxxon Micromot etc.).

The finer the grit, the smoother your surface will be later on. That's why I usually use a 180 grit sanding sponge to start with and then go over it again with 600 grit (Green Stuff World Foam Sanding Pads Coars Grit Assortment) or 1000 grit (Tamiya Sanding Sponge Sheet 1000).

What should I bear in mind with unpainted resin miniatures?
  • Light-coloured resins react to UV light. In the course of time, the parts may take on a yellowish colour - depending on how much natural light they are exposed to. To prevent this, they should be painted.
  • Actually, all paints that are suitable for plastics can be used for painting. Personally, I have had very good experience with acrylic (water- or alcohol-based) and chalk paint. But oil paint and nail varnish should also work well.
    Product example: Windsor & Newton Galeria
  • To make the paint adhere better to the surface, I recommend applying a primer beforehand. In my experience, however, it also works quite well without.
    Product example: Tamiya Fine Surface Primer
  • Ideally, the whole thing is also covered with a varnish after painting. This can be used to create a glossy surface, for example. This is not a must, but it makes the paint more resistant.
    Product example: Liquitex Gloss Varnish

Each miniature is unique, so there may be minimal variations.

These miniatures are not toys, but collectors' items for adults, so they are not suitable for children!

Handmade
Our miniatures, silicone moulds and clay cutters are handmade with love and care.
True to Scale
We attach great importance to true-to-scale replication. We only deviate from this if it would compromise the stability of the product.
Customized
Do you need a product on a different scale or even a customised product? Just get in touch with us and we'll see what we can do.

Frequently Asked Questions

↳ show all

How long does delivery take?

The processing time for handmade items is a maximum of 6 working days, as they are only made to order. Products in stock are dispatched after 2 working days.

The actual dispatch within Germany usually takes 2 - 4 working days. Within the EU it takes around 2 - 8 working days. Delivery to the rest of the world takes approx. 5 - 20 days. if items with different processing times are ordered, the goods are dispatched in a joint consignment. In this case, the delivery time corresponds to the item with the longest delivery time.

Do you also deliver internationally?

Basically yes, but not to all countries. An overview of all valid shipping destinations can be found on the Shipping & Payment page.

EU countries: Unfortunately, due to disproportionately high costs for the respective packaging licences, it is not possible for us to send physical products to EU countries that are not listed under Shipping and payment.

Non-EU countries: We are currently checking which countries can be shipped to without any problems. Unfortunately, this will take a while. But if your country is not yet listed, but you would like to order from Kleinkram Miniatures, just write us a message and we will check the shipping options as soon as possible.

Can large quantities also be ordered?

From an order quantity of approx. 70 items, the processing time of 6 working days cannot be guaranteed. It is still possible to place an order, but it is quite possible that we will contact you regarding a postponement of the delivery date.

Of course you can also contact us at any time and we can make you an offer.